"stainless steel centrifugal fan"

The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also be used in cement kiln decomposition process, steel smelting and other

Large Capacity Air Supply Of Industrial Kilns Centrifugal Fan​ Introduction The Large Capacity Air Supply Of Industrial Kilns Centrifugal Fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. For dust-containing gas, we can meet

Stainless Steel Energy Saving Smelting Furnace Backward Boiler Fan Introduction It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met.The fan blade placement angle is optimized, more wear-resistant and longer service life.The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure

Aluminum Alloy Backward Curved Impeller High Temperature Centrifugal Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in high

Stainless Steel Single Inlet Energy Saving Induced Draft Fan Introduction: The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas,

Carbon Steel Low Pressure Kilns Cooling Heavy Duty Centrifugal Fans Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The fan speed can be flexibly set by matching different diameters of belt pulley to make the fan run at the highest efficiency point and reduce energy waste. Motor sliding guides are provided for easy

Q235 Single Suction Steam Boiler High Temperature Centrifugal Fan Introduction The 7-08 series high temperature centrifugal blower is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. The current

Single Suction Medium Pressure CFB Boiler Heavy Duty Centrifugal Fans Detail introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. Mainly circulating fluidized bed system, smoke exhaust, material drying, industrial dust collector / filtration system, flue gas desulfurization, flue gas denitrification, industrial boiler induced air, cement production line, industrial waste heat recovery device, mineral powder

Coupling Driving Long Lifetime Lime Kiln High Temperature Centrifugal Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. It is made of high quality carbon steel, stainless steel or other metal materials are available upon request. Technical data series model