"high temperature air blower"

730rpm Heavy Duty Medium Pressure Anti Abrasive Air Supply Induced Draft Fan Introduction Of Centrifugal Fan The 6-06 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m³/h) Power (kW) 6-06 8D 1450 1859～2745 11000

High Air Flow Corrosion Resistant Industrial Boiler ID Boiler Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above

Single Inlet HG785 Alloyed Steel Energy Efficiency Biomass Boiler Fan Introduction The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. The performance of the fan is expressed by parameters such as fan flow, full pressure, spindle speed, shaft power and efficiency. Technical data series model Rotation Speed (r/min)

Aluminium Alloyed High Air Flow Forward Blast Furnace Boiler Fan Introduction The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas

16Mn Double Inlet High Pressure Antifraying Gas Delivery Flue Gas Fan Introduction Of Centrifugal Fan The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing cooling devices, reducing users’

Low Pressure High Air Flow Backward Curved Dust Collector Fan Introduction G4-10 and series collector fan are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure and flow of the fan by changing the speed. Fan systems with impeller diameters

Heavy Duty Long Lifetime Cement Fan Anti Abrasive Forward Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. Motor is carefully matched to the fan load, protection level IP54, and insulation class F. Motor ball bearings are used and lubricated. Motor and drives are isolated from the air stream to avoid grease or dirt accumulation. Detail introduction Fan shaft shall be heat treated through soaking furnace to

Carbon Steel Coupling Driven Power Plant Fan Energy Efficiency Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The fan speed can be flexibly set by matching different pulley diameters to make the

Medium Pressure Power Plant Fan Efficient Energy-Saving Anti Abrasive Introduction The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan. It has the characteristics of not easy dust accumulation and wear resistant, high efficiency and low noise. This series is a